Getting stuck on the side of the road is always a pain. If you had an electric jack you could save time and get back on the road. When you have a flat tire there are multiple steps you have to take to get the spare off.

In the trunk of your vehicle, there is probably a traditional scissor jack. You place it under the vehicle and manually turn it by hand. This car electric jack can take a bit of time to get the car off the ground especially if you have arthritis.

In addition, you have to loosen the lug nuts so you can dismount the wheel when the car is in the air. What if there was a better and simpler way to get your spare tire on? Introducing the electric car jack. This electric car jack hooks up to your battery or cigarette lighter for power.

You can jack your tire up of the ground without having to wind up the scissor jack. Time is important especially when you are working on the side of the highway. There are cars passing at 70+ mph. You want to make sure that you get back on the road as soon as possible.

This SUV electric jack can automatically jack up your car in a matter of time. Simply unscrew the top tell you get it to the desired height. Align it with your car’s lift poinst and press the lift button. Soon the jack will start lifting the car without you having to wind or spin anything.

This kit is great because it comes with all the tools you need to swap out your wheel when it goes flat. This electric car jack comes with all the features as above like the built in light, air compressor, car jack and road sign case.

Although with this kit your get an electric impact wrench. Typically you have to loosen the lug nuts by hand. If you don’t have enough strength it can be quite difficult. Although with this electric impact wrench it does the work for you. With the press of a button you loosen your lug nuts and remove your wheel.

The impact is powered by your battery or through your cigarette lighter. This means no matter where you get stranded your can swap out your wheel fast.

If you are looking for an all-in-one electric car jack kit then this has everything you need.

Electric hydraulic jacks are distinguished by their use of an incompressible liquid, such as hydraulic fluid or jack oil, as the means by which force multiplication is achieved. The primary mechanism by which force is applied varies, depending on the specific type of jack, but is typically a screw thread or a hydraulic cylinder. 3T electric hydraulic jack may be categorized based on the type of mechanism used to generate the lifting force, typically mechanical power, hydraulic power, or pneumatic power.

Electric wrenches at one time were predominantly air tools employed for mechanical disassembly of bolted assemblies. The impact wrench produced a successive series of hammer blows to an “impact-rated” hex socket and through that to a nut or bolt head, taking advantage of steel’s ability to withstand shock loading. The idea was to break a “frozen” nut or bolt free of corrosion without applying continuous leverage that could snap the threaded shank.

An impact wrench is not really intended to drive a fastener back on to its finished torque, although it is often used that way. Most of the torque is directed in the reverse direction, ie., the loosening direction of a right-handed thread. Most impact wrenches limit the torque applied in the forward direction to avoid overtightening a fastener. Final values are then properly set with a torque wrench. Torque sticks are available which apply known torque values through the wrench to the socket, and these are probably suitable for use on lug nuts but perhaps a bit crude for tightening down cylinder heads. Applying correct torque to any installed fastener is usually paramount in a precision assembly and too exacting of a task for an impact wrench. For assembly-line work, pulse tools are often used which are quieter and have better controllability of final torque values.

You never know when you may experience a flat tire. It can happen to anyone at the most inconvenient time. Maintaining correct tire pressure affects a tire’s wear and improves its performance. Luckily, you can easily inflate almost any tire at your job site if you have an air inflation. Read on to learn how to use an air compressor on your flat tire. 

You need to know how much air pressure must go into the tire. Most construction vehicles need at least 100 pounds per square inch, or PSI, in each tire. The exact amount might vary depending upon the axle load, number of tires per axle, and weather. Check the vehicle’s owner’s manual for the proper tire pressure amount.

Avoid using the PSI number found on the tire’s sidewall since that expresses the maximum amount of pressure. You need this information to know what type of air compressor to get. A smaller air compressor tank keeps the pressure between 100 to 150 PSI.